PPS-Compounds-TECACOMP-PPS-TRM-XS-black
PPS-Compounds-TECACOMP-PPS-TRM-XS-black

TECACOMP PPS TRM XS black 1061043

Tribologically optimised PPS compound with high strength

Due to its excellent mechanical and chemical resistance, polyphenylene sulphide (PPS) is a valued material for applications in automotive and mechanical engineering, even at high temperatures. The highly crystalline thermoplastic resists solvents as well as numerous acids and alkalis and can be used permanently up to 230 °C and for short periods up to 260 °C. 
 
Carbon fibres reinforce the already high strength of the compound, which absorbs only a small amount of moisture and has high dimensional and creep resistance. For tribological optimisation, graphite and a mineral filler are added. This intrinsic solid lubrication ensures that TECACOMP PPS TRM XS has a high dry-running capacity, especially with metallic mating partners.

Facts

Chemical designation
PPS (Polyphenylensulfide)
Colour
black
Density
1.46 g/cm3

Main Features

  • very high stiffness
  • good slide and wear properties
  • very good chemical resistance
  • high dimensional stability
  • high stiffness
  • high creep resistance
  • high heat deflection temperature
  • inherent flame retardant

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 154 MPa DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    22800 MPa DIN EN ISO 527-1
    Elongation at break (tensile test) 0,8 % DIN EN ISO 527-1
    Impact strength (Charpy) 22 kJ/m2 DIN EN ISO 179-1eU
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 90 C -
    Melting temperature 280 C -
    Heat distortion temperature 276 C ISO-R 75 Method A
    Service temperature 260 C short term -
    Service temperature 230 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Other properties Value Unit Parameter Norm
    Molding shrinkage 0,2 % longitudinal DIN EN ISO 294-4
    Molding shrinkage 0,7 % transverse DIN EN ISO 294-4
    Water absorption 0,1 % 23 °C / 50 % relative humidity up to saturation DIN EN ISO 62
  • product-technical-detail-collapse-item-3-lvl-1
    Processing parameter Value Unit Parameter Norm
    processing temperatures 300 - 340 C -
    Mould temperature 140 - 160 C -
  • product-technical-detail-collapse-item-4-lvl-1
    Predrying Value Unit Parameter Norm
    Permissible residual moisture content 0,05 % -
    Drying temperature 140 - 150 C -
    Drying time 2 - 4 h -