POM Compound TECACOMP POM TRM natural
POM Compound TECACOMP POM TRM natural

TECACOMP POM TRM natural 1064527

High strength POM-H optimised for dry-running sliding applications

Polyoxymethylene as a homopolymer (POM-H, also called polyacetal or polyformaldehyde) has high strength, hardness and rigidity. The thermoplastic is extremely wear-resistant and has low coefficients of friction, which have been further improved in the compound by embedding silicone oil and polytetrafluoroethylene (PTFE) in the polymer matrix. This solid lubrication also makes TECACOMP POM TRM suitable for dry running.

Automotive applications and mechanical engineering are classic areas of application for the acetal compound. Sliding rollers and bearings in particular show excellent test values in oscillating applications. Moisture absorption and thermal expansion are low. The compound has very good heat distortion and creep resistance and can be used permanently from -30 °C to 110 °C and for short periods up to 150 °C.

Facts

Chemical designation
POM-H (Polyacetal (Homopolymer))
Colour
natural
Density
1.43 g/cm3

Main Features

  • very good bearing and wear properties

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 59 MPa DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    2500 MPa DIN EN ISO 527-1
    Elongation at break (tensile test) 24 % DIN EN ISO 527-1
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature -60 C -
    Melting temperature 175 C -
    Heat distortion temperature 115 C ISO-R 75 Method A
    Service temperature 150 C short term -
    Service temperature 110 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1013 DIN EN 61340-2-3
    volume resistivity 1011 Ω*m DIN EN 61340-2-3
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Molding shrinkage 2,8 % longitudinal DIN EN ISO 294-4
    Molding shrinkage 2,5 % transverse DIN EN ISO 294-4
    Water absorption 0,2 % 23 °C / 50 % relative humidity up to saturation DIN EN ISO 62
  • product-technical-detail-collapse-item-4-lvl-1
    Processing parameter Value Unit Parameter Norm
    processing temperatures 180 - 220 C -
    Mould temperature 80 - 120 C -
  • product-technical-detail-collapse-item-5-lvl-1
    Predrying Value Unit Parameter Norm
    Permissible residual moisture content 0,05 % -
    Drying temperature 100 C -
    Drying time 4 - 8 h -