TECARAN ABS grey

ABS

add to list
product enquiry
request sample
Request machined part
Request customised tube
Request customised profile
Ensinger TECARAN™ ABS material is a terpolymer and an amorphous resin. It is manufactured by combining three different compounds. The three that make up TECARAN™ ABS are acrylonitrile, butadiene, and styrene. TECARAN™ ABS occupies the unique position of being a bridge between the industrial and other higher performance engineering thermoplastics. Its performance is characterised by toughness and impact strength, even at low temperatures, good stiffness and machinability.

Facts

Chemical designation
ABS (Acrylnitrile-butadiene-styrene copolymer)
Colour
grey
Density
1.04 g/cm3

Main Features

  • high stiffness
  • electrically insulating
  • low density
  • good chemical resistance
  • high toughness
  • good damping
  • low moisture absorption
  • good weldable and bondable

Target industries

mechanical engineering
automotive industry
electronics
food technology

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 1700 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 32 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 32 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 3 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 49 % 50mm/min DIN EN ISO 527-2
    Flexural strength 49 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 1600 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 1400 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 15/26/46 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) n.b. kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Notched impact strength (Charpy) 34 kJ/m2 max. 7,5J DIN EN ISO 179-1eA
    Shore hardness 75 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 104 C DIN EN ISO 11357
    Service temperature 100 C short term NN
    Service temperature 75 C long term NN
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω -
    volume resistivity 1014 Ω*cm -
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases - - -
    Flammability (UL94) HB - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - - NN
    Water absorption 0.07 - 0.2 % 24h / 96h (23°C) DIN EN ISO 62
  • product-technical-detail-collapse-item-4-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €€ % -

Stock program