TECAPET TF grey

PET with PTFE

add to list
product enquiry
request sample
Request machined part
Request customised profile
TECAPET TF grey is a PET polyester that has been modified with PTFE additive, to improve its wear characteristics. The material is suitable to be used in many areas in the food processing industry, as it carries all necessary compliances for direct food contact. The addition of PTFE as a solid lubricant, allows for this PET material to demonstrate excellent sliding properties in addition to excellent wear characteristics, as well as the familiar physical properties inherant to standard TECAPET PET polyester material.

Compliances

Facts

Chemical designation
PET (Polyethylene terephthalate)
Colour
grey
Density
1.43 g/cm3

Main Features

  • high strength
  • good wear properties
  • high toughness
  • good chemical resistance
  • good slide and wear properties
  • high stiffness
  • not hot water resistant over 60°C

Target industries

mechanical engineering
food technology
electronics
automotive industry

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 3200 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 78 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 78 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 4 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 6 % 50mm/min DIN EN ISO 527-2
    Flexural strength 119 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 3300 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 2700 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 21/38/86 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 42 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Shore hardness 82 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 82 C DIN EN ISO 11357
    Melting temperature 249 C DIN EN ISO 11357
    Thermal conductivity 0.30 W/(k*m) ISO 22007-4:2008
    Specific heat 1.1 J/(g*K) ISO 22007-4:2008
    Service temperature 170 C short term NN
    Service temperature 110 C long term NN
    Thermal expansion (CLTE) 8 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 10 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω -
    volume resistivity 1014 Ω*cm -
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases - - -
    Flammability (UL94) HB - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - - NN
    Water absorption 0.02 - 0.03 % 24h / 96h (23°C) DIN EN ISO 62
  • product-technical-detail-collapse-item-4-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €€ % -

Stock program