Polyamid TECAMID 66 GF35 natural
Polyamid TECAMID 66 GF35 natural

TECAMID 66 GF35 natural

PA 66 filled with 35% glass fibres

add to list
product enquiry
request sample
Request machined part
Request customised profile
PA66 GF35 is a 35% glass fibre reinforced plastic PA 66. It is often used in industries such as aviation and mechanical engineering. Compared to TECAMID 66 GF30 black this glass filled nylon 66 has improved stiffness yet again and can withstand high loads. The properties make the PA 66 GF modification a material that is suitable for components that are subjected to high static loads over long periods of time and at high temperatures. However, Nylon 66 GF35 is less suitable for sliding applications as glass fibres can lead to considerable abrasion on contact surfaces. Ensinger manufactures PA plastic (TECAMID 66 GF35 natural) in various shapes such as PA rod, PA sheet and PA tube.

Compliances

Facts

Chemical designation
PA 66 (Polyamide 66)
Colour
ivory
Density
1.4 g/cm3

Main Features

  • very high stiffness
  • resistant to many oils, greases and fuels
  • good wear properties
  • very high strength
  • high dimensional stability
  • good heat deflection temperature
  • good weldable and bondable

Target industries

mechanical engineering
aircraft and aerospace technology
automotive industry

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 5500 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 103 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 7 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 11 % 50mm/min DIN EN ISO 527-2
    Flexural strength 150 MPa DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 5100 MPa DIN EN ISO 178
    Impact strength (Charpy) 85 kJ/m2 DIN EN ISO 179-1eU
    Notched impact strength (Charpy) 5 kJ/m2 DIN EN ISO 179-1eA
    Shore hardness 84 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 48 C DIN EN ISO 11357
    Melting temperature 254 C DIN EN ISO 11357
    Service temperature 170 C short term NN
    Service temperature 110 C long term NN
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 O Silver electrode, 23°C, 12% r.h. DIN IEC 60093
    volume resistivity 1014 O*cm Silver electrode, 23°C, 12% r.h. DIN IEC 60093
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases (+) - -
    Flammability (UL94) HB - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering (+) - NN

Stock program