PA filament TECAFIL PA6 GF30 black 655px
PA filament TECAFIL PA6 GF30 black 655px
90.00 EUR

TECAFIL PA6 GF30 black - 2.85 mm

PA6 GF30 Filament

To enable printing of engineering plastics on all types of printers, we have developed and qualified our TECAFIL PA6 GF30 black, a nylon filament reinforced with 30 % glass fibers.
To bridge the gap between standard and high temperature plastic filaments, Ensinger manufactures a modified PA6 filament, which is categorised as an engineering thermoplastic filament.
Our nylon 6 filament is available in 1,75 mm and 2,85 mm and is well suited for all industrial or desktop printers. Therefore, this filament is also qualified for Ultimaker printers like the S5 and S3. The recommended print temperature of 270 °C and a print bed temperature of 75 °C make it very easy to print end applications or prototypes in perfect quality. With its 30 % glass fiber volume, this material can be considered one of the strongest nylon filaments on the market in terms of mechanical strength.
Thanks to its good tensile strength, high stiffness, compressive strength and impact resistance, our glass-filled nylon filament enables a wide range of applications, such as structural parts or applications with high static loads and high temperature conditions over long periods of time. Especially where high stiffness and strength is a key requirement, such as in the automotive or electronics industry as well as in mechanical engineering, our PA6 GF30 filament is a perfect fit for your application.
Due to its high fiber volume, our PA filament can reduce the warpage of your printed application compared to conventional polyamide filaments.

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
black
Density
1.36 g/cm3 (*2)

Main Features

  • high strength
  • high dimensional stability
  • good weldable and bondable
  • good heat deflection temperature
  • resistant to many oils, greases and fuels

Target industries

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    General material information Value Unit Parameter Norm
    Diameter 2,85 +/- 0,05 mm -
    Spool measurements Ø 52 mm holder -
    Spool measurements 55 mm width -
    Spool measurements Ø 200 mm outer diameter -
    Spool Material Polycarbonate - -
    Filament Load per Spool 750 g -
  • product-technical-detail-collapse-item-1-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 71,7 MPa 5mm/min, Orientation XY DIN EN ISO 527-2
    Tensile strength 84,1 MPa 5mm/min, Orientation XZ DIN EN ISO 527-2
    Tensile strength 22,3 MPa 5mm/min, Orientation ZX DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    5215,0 MPa 5mm/min, Orientation XY DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    6114,0 MPa 5mm/min, Orientation XZ DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    1435,8 MPa 5mm/min, Orientation ZX DIN EN ISO 527-2
    Elongation at break (tensile test) 5,0 % 5mm/min, Orientation XY DIN EN ISO 527-2
    Elongation at break (tensile test) 4,0 % 5mm/min, Orientation XZ DIN EN ISO 527-2
    Elongation at break (tensile test) 3,3 % 5mm/min, Orientation ZX DIN EN ISO 527-2
    Flexural strength 115,0 MPa 2mm/min, Orientation XY DIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    4460,0 MPa 2mm/min, Orientation XY DIN EN ISO 178
  • product-technical-detail-collapse-item-2-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 60 C ASTM D 3418
    Melting temperature 220 C DIN EN ISO 11357
    Deflection temperature 200 C HDT-A ISO-R 75 Method A
    Service temperature 180 C short term -
    Service temperature 100 C long term -
    Thermal expansion (CLTE) 6 10-5*1/K DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Moisture absorption 0,3 % DIN EN ISO 62
    Melt flow index (MFI) - g/10 min DIN EN ISO 1133
  • product-technical-detail-collapse-item-4-lvl-1
    Processing parameter Value Unit Parameter Norm
    Nozzle temperature 260 - 290 C -
    Max. melt temperature 300 C -
    Print bed temperature 80 - 140 C -
    Build chamber temperature 80 - 100 C -
    Nozzle diameter 0,4 - 0,6 mm -
    Print speed 30 - 50 mm/s -
    Fan speed 0 % -
  • product-technical-detail-collapse-item-5-lvl-1
    Predrying Value Unit Parameter Norm
    Drying temperature 80 C -
    Drying time 8 h -