TECACOMP PPS CF30 TF15 black 1061041
TECACOMP PPS CF30 TF15 black 1061041

TECACOMP PPS CF30 TF15 black 1061041

Carbon fibre reinforced PPS compound with optimised sliding properties

As a high performance plastic, polyphenylene sulphide (PPS) has very resistant polymers whose excellent properties are retained even at high temperatures. TECACOMP PPS CF30 TF15 black can be used permanently at temperatures up to 230 °C and even up to 260 °C for short periods.

The thermoplastic, which is impermeable to most liquids and gases, is hydrolysis-resistant, has outstanding chemical resistance, is inherently flame-retardant and a good electrical insulator. It absorbs very little moisture and therefore has high dimensional stability and low creep even at high temperatures. 

The compound, reinforced with 30 % carbon fibres, has high stiffness and, thanks to the addition of polytetrafluoroethylene (PTFE), improved sliding and wear properties. It is suitable for mechanically, tribologically, electrically, thermally and chemically highly stressable molded parts, for example in the electronics and automotive sectors.

Facts

Chemical designation
PPS (Polyphenylensulfide)
Colour
black
Density
1.52 g/cm3

Main Features

  • good slide and wear properties
  • very good chemical resistance
  • high dimensional stability
  • very high stiffness
  • high creep resistance
  • high heat deflection temperature
  • inherent flame retardant

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 160 MPa DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    28400 MPa DIN EN ISO 527-1
    Elongation at break (tensile test) 0,7 % DIN EN ISO 527-1
    Impact strength (Charpy) 27 kJ/m2 DIN EN ISO 179-1eU
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 90 C -
    Melting temperature 280 C -
    Heat distortion temperature 277 C ISO-R 75 Method A
    Service temperature 260 C short term -
    Service temperature 230 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Other properties Value Unit Parameter Norm
    Molding shrinkage 0,2 % longitudinal DIN EN ISO 294-4
    Molding shrinkage 0,5 % transverse DIN EN ISO 294-4
  • product-technical-detail-collapse-item-3-lvl-1
    Processing parameter Value Unit Parameter Norm
    processing temperatures 300 - 340 C -
    Mould temperature 135 - 155 C -
  • product-technical-detail-collapse-item-4-lvl-1
    Predrying Value Unit Parameter Norm
    Permissible residual moisture content 0,05 % -
    Drying temperature 140 - 150 C -
    Drying time 2 - 4 h -