TECAPEI GF30 natural

PEI filled with 30% glass fibre

add to list
product enquiry
request sample
Request machined part
Request customised profile
This is a special 30% glass fibre reinforced PEI, manufactured by Ensinger under the tradename TECAPEI GF30 natural. In comparison to unfilled PEI (TECAPEI natural), PEI GF30 demonstrates high rigidity, very high mechanical strength, as well as extremely good dimensional stability, and good resistance to high energy radiation. These properties make PEI with 30% glass fibres suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions.

Compliances

Facts

Chemical designation
PEI (Polyetherimide)
Colour
amber
Density
1.51 g/cm3

Main Features

  • good heat deflection temperature
  • high dimensional stability
  • high thermal and mechanical capacity
  • high strength
  • high creep resistance
  • resistance against high energy radiation
  • electrically insulating
  • sensitive to stress cracking

Target industries

electronics
semiconductor technology
mechanical engineering
vacuum technology
automotive industry

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 5300 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 135 MPa 5mm/min DIN EN ISO 527-2
    Tensile strength at yield 135 MPa 5mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 4 % 5mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 4 % 50mm/min DIN EN ISO 527-2
    Flexural strength 195 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 5500 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 4200 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 18 - 39 MPa 1% / 2% EN ISO 604
    Impact strength (Charpy) 51 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Notched impact strength (Charpy) 6 kJ/m2 max. 2J DIN EN ISO 179-1eA
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 213 C DIN EN ISO 11357
    Melting temperature C DIN EN ISO 11357
    Service temperature 200 C short term NN
    Service temperature 170 C long term NN
    Thermal expansion (CLTE) 3 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 3 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 4 10-5*1/K 100-150°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω -
    volume resistivity 1014 Ω*cm -
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases + - -
    Flammability (UL94) V0 - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - - -
    Water absorption 0.04 - <0.1 % 24h / 96h (23°C) DIN EN ISO 62

Stock program