TECATEC PA12 CF50 T200 CP/IP/OS V01 natural

PA12 COMPOSITE WITH 50 VOL% CARBON FIBRES

Compared to other thermoplastic polyamides, polyamide 12 or Nylon 12 is characterised by a very low moisture absorption and can be used permanently in a wide temperature range from -60 °C to 110 °C. In the composite material, a twill weave of continuous carbon fibres embedded in the polymer matrix improves strength and fracture toughness.
The electrically conductive carbon composite has a density of only 1.5 g/cm3, excellent mechanical properties and low thermal expansion. The chemical resistance exceeds that of PA6 carbon composite.
Carbon fibre reinforced PA12 is therefore often used in the chemical industry and medical technology, for example for X-ray stretchers, as the composite material is X-ray transparent.
Ensinger produces TECATEC PA12 CF50 T200 natural as coated semipreg (CP) and fully impregnated and consolidated prepreg (IP). Multilayer organosheets (OS) for thermoforming are also available.

Facts

Chemical designation
PA 12 (Polyamide 12)
Colour
natural
Density
1.39 g/cm3

Main Features

  • very good abrasion resistance
  • very good mechanical strength
  • low moisture absorption

Target industries

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    General material information Value Unit Parameter Norm
    Fibre type Carbon HT 3k -
    Fibre architecture Twill 2/2 - -
    Fibre areal weight 200 g/m2 -
    Fibre volume content 50 % -
    Resin weight content 36.7 % -
    Areal weight finished product 316 g/m2 -
    Material widths 1000 - 1270 mm others on request -
    ply thickness (consolidated) 0.23 mm -
  • product-technical-detail-collapse-item-1-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 642 MPa ISO 527-4
    Modulus of elasticity
    (tensile test)
    53000 MPa ISO 527-4
    Flexural strength 660 MPa ISO 14125
    Modulus of elasticity
    (flexural test)
    56000 MPa ISO 14125
    Interlaminar shear strength 41 MPa ISO 14130
  • product-technical-detail-collapse-item-2-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 37 C DIN EN ISO 11357
    Melting temperature 180 C DIN EN ISO 11357
    Service temperature 150 C short term -
    Service temperature 110 C long term -
    Thermal expansion (CLTE) 3 106*K-1 in 0° and 90° direction -
  • product-technical-detail-collapse-item-3-lvl-1
    Predrying Value Unit Parameter Norm
    Drying temperature 80 C -
    Drying time 6-8 h -