TECAFIL PEKK natural - 1.75 mm

PEKK Filament

Ensinger manufactures an unfilled PEKK filament - TECAFIL PEKK natural.
PEKK (Polyetherketoneketone) belongs to the group of PAEK filaments, making it one of the strongest natural filaments on the market. Ensinger's PEKK filament is based on the 6000 series of ARKEMA Kepstan® resin. PEKK filament is becoming increasingly popular in additive manufacturing because it can be printed amorphously and is considered easier to process than PEEK. PEKK filament is often used for the replacement of metal components when optimisations are required in terms of light weight while maintaining strength.
The characteristics of PEKK plastics, such as excellent flame resistance and low smoke emission, allow them to be used in important industrial applications in aerospace and transportation. Good electrical insulation properties result in frequent use of PEKK filaments in the electronics industry. Many applications in the chemical, medical or bioprocess industries are also made from PEKK, as it shows good chemical resistance against acids, alcohols or ethers.
Why should you print our PEKK filament?
Some semi-crystalline or amorphous materials have problems with diffusion between layers or trans-layer crystallisation. Our PEKK filament is optimised for 3D printing due to its polymer structure and - especially the 6000 series - in terms of a slower crystallisation rate and high flow rate. This results in improved layer adhesion of your printed applications.
Using the structure of a copolymer, it is possible to precisely control the melting point and crystallisation rate when printing PEKK filament.

Printed PEKK components can be operated continuously at temperatures from 250 °C to 260 °C, with short-time exposure up to 300 °C. As PEKK is a high performance material, it can only be used on an industrial printer that complies with the recommended process parameters. The printing and part properties can be influenced by the printing parameters and post-processing. It is easier to print PEKK in an amorphous state and post-treat it to increase crystallinity and material characteristics.
Kepstan® is a registered trademark of Arkema S.A.

Facts

Chemical designation
PEKK (Polyetherketoneketone)
Colour
amber
Density
1.27 g/cm3 (*2)

Main Features

  • inherent flame retardant
  • good dimensional stability
  • high heat deflection temperature
  • high thermal and mechanical capacity

Target industries

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    General material information Value Unit Parameter Norm
    Diameter 1,75 +/- 0,05 mm -
    Spool measurements Ø 52 mm holder -
    Spool measurements 55 mm width -
    Spool measurements Ø 200 mm outer diameter -
    Spool Material Polycarbonate - -
    Filament Load per Spool 500 g -
  • product-technical-detail-collapse-item-1-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 86,3 MPa 5mm/min, Orientation XY DIN EN ISO 527-2
    Tensile strength 89,5 MPa 5mm/min, Orientation XZ DIN EN ISO 527-2
    Tensile strength 92,7 MPa 5mm/min, Orientation ZX DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    2921,0 MPa 5mm/min, Orientation XY DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    3041,0 MPa 5mm/min, Orientation XZ DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    2997,7 MPa 5mm/min, Orientation ZX DIN EN ISO 527-2
    Elongation at break (tensile test) 95,6 % 5mm/min, Orientation XY DIN EN ISO 527-2
    Elongation at break (tensile test) 120,3 % 5mm/min, Orientation XZ DIN EN ISO 527-2
    Elongation at break (tensile test) 79,2 % 5mm/min, Orientation ZX DIN EN ISO 527-2
    Flexural strength 128,0 MPa 2 mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3000,0 MPa 2 mm/min, 10 N DIN EN ISO 178
  • product-technical-detail-collapse-item-2-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 160 C ASTM D 3418
    Melting temperature 300 C DIN EN ISO 11357
    Deflection temperature 139 C HDT-A ISO-R 75 Method A
    Service temperature 230 C short term -
    Service temperature 200 C long term -
    Thermal expansion (CLTE) - 10-5*1/K DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Moisture absorption 0,6 % DIN EN ISO 62
  • product-technical-detail-collapse-item-4-lvl-1
    Processing parameter Value Unit Parameter Norm
    Nozzle temperature 340 - 380 C -
    Max. melt temperature 410 C -
    Print bed temperature 140 - 160 C -
    Build chamber temperature 120 - 160 C -
    Nozzle diameter 0,4 mm -
    Print speed 30 - 40 mm/s -
    Fan speed 0 % -
  • product-technical-detail-collapse-item-5-lvl-1
    Predrying Value Unit Parameter Norm
    Drying temperature 120 C -
    Drying time 8 h -