TECAPEEK RP natural

Reprocessed PEEK

TECAPEEK RP natural is the more environmentally friendly alternative to our conventional material TECAPEEK natural. TECAPEEK RP natural consists of recycled PEEK and therefore has an optimised CO2 footprint compared to the fossil material. We are not talking about peek recycling here, but about the reprocessing of PEEK by-products from customer returns under the Ensinger Shapes return program.

TECAPEEK RP natural is comparable to the fossil based version and is characterized by outstanding mechanical properties, especially at high temperatures. The reprocessed PEEK material is also known for its chemical resistance and application temperatures of up to 260 °C. Thanks to its excellent dimensional stability and high creep resistance, it is particularly suitable for demanding machined parts.
Ensinger engages in PEEK reprocessing of TECAPEEK RP natural in the form of PEEK tubes, PEEK plates and PEEK rods made from reprocessed plastic material.

TECAPEEK RP natural is part of Ensinger's "Reuse for Tomorrow" solutions, which includes carefully developed products that contribute significantly to environmental protection through their reduced CO2 footprint. 

Facts

Chemical designation
PEEK (Polyetheretherketone)
Color
beige
Density
1.31 g/cm3

Main Features

  • from reprocessed by-products/ production residues with optimized PCF
  • inherent flame retardant
  • good heat deflection temperature
  • good machinability
  • resistance against high energy radiation
  • very good chemical resistance
  • high creep resistance
  • hydrolysis and superheated steam resistant

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Condition Test Method
    Modulus of elasticity
    (flexural test)
    4200 MPa 2mm/min, 10 N DIN EN ISO 178
    Flexural strength 175 MPa 2mm/min, 10 N DIN EN ISO 178
    Elongation at break (tensile test) 15 % 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 109 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 5 % 50mm/min DIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    4200 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 109 MPa 50mm/min DIN EN ISO 527-2
    Notched impact strength (Charpy) 4 kJ/m2 max. 7,5J DIN EN ISO 179-1eA
    Ball indentation hardness 253 MPa ISO 2039-1
    Impact strength (Charpy) n.b. kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Compression modulus 3400 MPa 5mm/min, 10 N EN ISO 604
    Shore hardness 89 D DIN EN ISO 868
    Compression strength 23/43/102 MPa 1% / 2% / 5% EN ISO 604
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Condition Test Method
    Heat distortion temperature 162 C HDT, Method A ISO-R 75 Method A
    Melting temperature 341 C DIN EN ISO 11357
    Glass transition temperature 150 C DIN EN ISO 11357
    Thermal conductivity 0.27 W/(k*m) ISO 22007-4:2008
    Specific heat 1.1 J/(g*K) ISO 22007-4:2008
    Thermal expansion (CLTE) 5 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Service temperature 300 C short term NN
    Thermal expansion (CLTE) 5 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
    Service temperature 260 C long term -
    Thermal expansion (CLTE) 7 10-5*1/K 100-150°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Condition Test Method
    surface resistivity 1015 Silver electrode, 23°C, 12% r.h. -
    volume resistivity 1015 Ω*cm Silver electrode, 23°C, 12% r.h. DIN IEC 60093
    Dielectric strength 73 kV/mm 23°C, 50% r.h. ISO 60243-1
    Resistance to tracking (CTI) 125 V Platin electrode, 23°C, 50% r.h., solvent A DIN EN 60112
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Condition Test Method
    Resistance to hot water/ bases + -
    Flammability (UL94) V0 listed (value at 1.5mm) DIN IEC 60695-11-10;
    Resistance to weathering - -
    HZ Food technology yes - -
    HZ-Catalogue yes - -
    HZ Brochure for traders yes lbs/in^2 -
    HZ Technical guidelines yes lbs/in^2 -
    HZ Semicon brochure yes - -
    HZ Aerospace Brochure yes - -
    HZ Öl & Gas Broschüre yes - *** new ***
    Water absorption 0.02 - 0.03 % 24h / 96h (23°C) DIN EN ISO 62
    Water absorption % saturation (23°C) DIN EN ISO 62

Stock program