TECAMID 6 GF30 black

PA 6 glass fibre reinforced

add to list
product enquiry
request sample
PA 6 GF30 is a 30 % glass fibre reinforced polyamide that we manufacture under the trade name TECAMID 6 GF30 black. It offers higher strength, rigidity, creep strength and dimensional stability than unreinforced polyamide 6. These PA6 GF30 properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. As glass fibres tend in some cases to have a marked abrasive effect on mating surfaces, glass filled nylon 6 is less suitable for sliding applications.

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
black
Density
1.36 g/cm3

Main Features

  • very high strength
  • resistant to many oils, greases and fuels
  • good wear properties
  • good weldable and bondable
  • high dimensional stability
  • good heat deflection temperature
  • good machinability

Target industries

mechanical engineering
electronics
automotive industry

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 5700 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 98 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 98 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 4 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 5 % 50mm/min DIN EN ISO 527-2
    Flexural strength 140 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 5200 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 4200 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 21/42/107 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 60 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Shore hardness 84 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 49 C DIN EN ISO 11357
    Melting temperature 218 C DIN EN ISO 11357
    Thermal conductivity 0.41 W/(k*m) ISO 22007-4:2008
    Specific heat 1.3 J/(g*K) ISO 22007-4:2008
    Service temperature 180 C short term NN
    Service temperature 100 C long term NN
    Thermal expansion (CLTE) 6 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 6 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω Silver electrode, 23°C, 12% r.h. -
    volume resistivity 1014 Ω*cm Silver electrode, 23°C, 12% r.h. -
    Dielectric strength 32 kV/mm 23°C, 50% r.h. ISO 60243-1
    Resistance to tracking (CTI) 550 - 475 V Platin electrode, 23°C, 50% r.h., solvent A DIN EN 60112
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases (+) - -
    Flammability (UL94) HB - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering (+) - NN
    Water absorption 0.2 - 0.3 % 24h / 96h (23°C) DIN EN ISO 62
  • product-technical-detail-collapse-item-4-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €€

Stock program