TECAMID 6 FRT natural

PA 6 natural modified for flame resistance

add to list
product enquiry
request sample
TECAMID 6 FRT is PA 6 that has been modified for inherent flame resistance. This nylon combines good wear and sliding properties with high strength and good chemical resistance.TECAMID 6 FRT is suitable for aerospace and railway industries and complies to the standards FAR 25.853 and EN 45545. Futhermore the raw material is UL94 V-0 approved.

Compliances

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
ivory
Density
1.19 g/cm3

Main Features

  • flame retardant according to UL94 V-0
  • flame retardant as per FAR 25.853
  • tested according to EN 45545
  • resistant to many oils, greases and fuels
  • good slide and wear properties
  • high strength
  • good machinability

Target industries

aircraft and aerospace technology
transportation
mechanical engineering
electronics
automotive industry

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 3900 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 79 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 79 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 3 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 3 % 50mm/min DIN EN ISO 527-2
    Flexural strength 121 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 3900 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 3300 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 15 - 34 MPa 1% / 2% EN ISO 604
    Impact strength (Charpy) 53 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Shore hardness 81 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 45 C DIN EN ISO 11357
    Melting temperature 221 C DIN EN ISO 11357
    Service temperature 160 C short term NN
    Service temperature 100 C long term NN
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω Silver electrode, 23°C, 12% r.h. -
    volume resistivity 1014 Ω*cm Silver electrode, 23°C, 12% r.h. -
    Resistance to tracking (CTI) 600 - DIN EN 60112
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases (+) - -
    Flammability (UL94) V0 - raw material listed (value at 1.5mm) DIN IEC 60695-11-10;
    Flammability R22 HL1 HL2, R23 HL3 EN 45545-2:2016
    Flammability + - 60 sec. Vertical Bunsen Burner test, 25.853 (a) and Appendix F, Part I, para. (a)(1)(i) FAR 25.853
    Flammability + - 15 sec. Horizontal Bunsen Burner test, 25.853 (a) and Appendix F, Part I, para. (a)(1)(iv) and (v) FAR 25.853
    Flammability + - Heat Release, FAR Part 25, § 25.853 (d) and Appendix F, Part IV FAR 25.853
    Flammability + - Smoke density FAR Part 25, § 25.853 (d) and Appendix F, Part V FAR 25.853
    Flammability + - Gas Toxicity, as per Airbus directive ABD 0031 AITM 3.0005
    Resistance to weathering - - -
  • product-technical-detail-collapse-item-4-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €€

Stock program