TECAPEEK MT CF30 black

Medical PEEK carbon fibre reinforced

add to list
product enquiry
request sample
Ensinger's PEEK CF30, otherwise known as TECAPEEK CF30 black, can also be supplied in a version that is suitable for medical applications. For this PEEK CF 30 medical grade, special carbon fibres are combined with Victrex® PEEK polymer in order to fulfil the requirements for biocompatibility according to ISO 10993, which are tested on the stock shape. Additional information on USP Class VI is available. Ensinger will issue the relevant certification on an order related basis.

Compliances

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
black
Density
1.42 g/cm3

Main Features

  • very high stiffness
  • very high creep resistant
  • very good chemical resistance
  • good wear properties
  • biocompatible
  • good heat deflection temperature
  • very good sterilisable

Target industries

medical technology

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 6000 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 115 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 115 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 5 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 5 % 50mm/min DIN EN ISO 527-2
    Flexural strength 188 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 6000 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 4500 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 22/43/108 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 58 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Shore hardness 91 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 146 C DIN EN ISO 11357
    Melting temperature 341 C DIN EN ISO 11357
    Thermal conductivity 0.59 W/(k*m) ISO 22007-4:2008
    Specific heat 1.7 J/(g*K) ISO 22007-4:2008
    Service temperature 300 C short term NN
    Service temperature 260 C long term NN
    Thermal expansion (CLTE) 5 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 5 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 7 10-5*1/K 100-150°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 102 - 1010 Ω Conductive rubber, 23°C, 12% r.h. DIN EN 61340-2-3
    volume resistivity 103 - 1011 Ω*cm Conductive rubber, 23°C, 12% r.h. DIN EN 61340-2-3
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases + - -
    Flammability (UL94) V0 - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - - -
    Water absorption 0.02 - 0.03 % 24h / 96h (23°C) DIN EN ISO 62

Stock program