>

TECATRON natural

PPS unfilled

add to list
product enquiry
request sample
Request machined part
Polyphenylenesulphide (PPS) - TECATRON - is a semi crystalline, high temperature thermoplastic. Due to its chemical structure, PPS is a very resistant polymer with high mechanical strength and rigidity, even at temperatures above 200°C. In addition to the low water absorption, PPS also shows good dimensional stability, low tendency to creep and excellent electrical properties, and is thus well suited for parts with tightest tolerances. Furthermore, unfilled PPS is very chemically stable, even at high temperatures, but does show sensitivity to UV radiation when uncoloured. There is no known solvent that dissolves TECATRON PPS at temperatures below 200°C (392°F).

Compliances

Facts

Chemical designation
PPS (Polyphenylensulfide)
Colour
beige
Density
1.36 g/cm3

Main Features

  • good heat deflection temperature
  • good chemical resistance
  • resistance against high energy radiation
  • high strength
  • high dimensional stability
  • high stiffness
  • high creep resistance

Target industries

aircraft and aerospace technology
electronics
mechanical engineering
oil and gas industry
vacuum technology
semiconductor technology
chemical technology

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 4100 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 103 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 103 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 6,5 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 6,5 % 50mm/min DIN EN ISO 527-2
    Flexural strength 166 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 3800 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 2860 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 27/56/134 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 80 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Notched impact strength (Charpy) 2,6 kJ/m2 max. 7,5J DIN EN ISO 179-1eA
    Shore hardness 87 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 97 C DIN EN ISO 11357
    Melting temperature 281 C DIN EN ISO 11357
    Thermal conductivity 0.25 W/(k*m) ISO 22007-4:2008
    Specific heat 1.0 J/(g*K) ISO 22007-4:2008
    Service temperature 260 C short term NN
    Service temperature 230 C long term NN
    Thermal expansion (CLTE) 5 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 6 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 11 10-5*1/K 100-150°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω DIN IEC 60093
    volume resistivity 1014 Ω*cm DIN IEC 60093
    Dielectric strength 24 kV/mm ASTM D 149
    Resistance to tracking (CTI) 150 IEC 60112
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases + -
    Flammability (UL94) V0 corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - -
    Water absorption <0.01 / 0.01 % 24h / 96h (23°C) DIN EN ISO 62

Stock program