>

TECADUR PET natural

PET unfilled

add to list
product enquiry
request sample
Request machined part
Ensinger offers unfilled and unmodified PET polyester as a basic type of PET under the tradename TECADUR PET. Due to its good creep strength, low moisture absorption and outstanding dimensional stability, PET is extremely well suited for applications where complex parts combined with the tightest requirements in dimensional accuracy and surface quality are needed. TECADUR PET also exhibits very good chemical resistance characteristics.

Compliances

Facts

Chemical designation
PET (Polyethylene terephthalate)
Colour
white
Density
1.39 g/cm3

Main Features

  • high strength
  • good slide and wear properties
  • good weldable and bondable
  • good wear resistance
  • not hot water resistant over 60°C
  • high toughness
  • high stiffness
  • good chemical resistance

Target industries

mechanical engineering
electronics
automotive industry
food technology

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 3300 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 91 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 91 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 4 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 14 % 50mm/min DIN EN ISO 527-2
    Flexural strength 134 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 3400 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 2800 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 21/38/89 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 150 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 81 C DIN EN ISO 11357
    Melting temperature 244 C DIN EN ISO 11357
    Service temperature 170 C short term NN
    Service temperature 110 C long term NN
    Thermal expansion (CLTE) 8 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 10 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω -
    volume resistivity 1014 Ω*cm -
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases - -
    Flammability (UL94) HB - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - - NN
    Water absorption 0.02 / 0.03 % 24h / 96h (23°C) DIN EN ISO 62

Stock program