>

TECAPEEK black

PEEK black

add to list
product enquiry
request sample
Request machined part
In addition to unfilled PEEK natural which is beige-brown in color, a black pigmented version of PEEK is also available. TECAPEEK black is manufactured by Ensinger and may use Victrex® PEEK 450 polymer or Solvay KetaSpire® KT-820. It is available in rod, plate, and tube in a variety of dimensions. This black pigmented version of PEEK plastic demonstrates improved UV resistance in addition to the other typical PEEK properties which make this product an ideal material of choice for outdoor use.

Compliances

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
black
Alternative colours available
beige
Density
1.31 g/cm3

Main Features

  • good heat deflection temperature
  • inherent flame retardant
  • resistance against high energy radiation
  • high strength
  • high creep resistance
  • good chemical resistance
  • hydrolysis and superheated steam resistant

Target industries

mechanical engineering
chemical technology
electronics
vacuum technology
automotive industry
aircraft and aerospace technology

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 4100 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 100 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 100 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 3 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 3 % 50mm/min DIN EN ISO 527-2
    Flexural strength 171 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 4100 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 3300 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 22/41/95 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 75 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Shore hardness 87 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 151 C DIN EN ISO 11357
    Melting temperature 341 C DIN EN ISO 11357
    Thermal conductivity 0.30 W/(k*m) ISO 22007-4:2008
    Specific heat 1.1 J/(g*K) ISO 22007-4:2008
    Service temperature 300 C short term NN
    Service temperature 260 C long term NN
    Thermal expansion (CLTE) 5 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 5 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 7 10-5*1/K 100-150°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1012 Ω -
    volume resistivity 1012 Ω*cm DIN EN 61340-2-3
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases + - -
    Flammability (UL94) V0 - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering - - -
    Water absorption 0.02 - 0.03 % 24h / 96h (23°C) DIN EN ISO 62

Stock program