>

TECAMID 6 FRT black

Flame retardant plastic PA6 black

TECAMID 6 FRT black is a flame retardant plastic, and is therefore included in the group of non flammable plastics. This flame resistant PA6 plastic is equivalent to all other nylon PA 6 materials when it comes to mechanical, chemical, thermal and electrical properties. Thus, it can be considered a material with good sliding properties and excellent resistance to oil and grease.
By adding a flame retardant, we achieve flammability requirements consistent with UL94 V-0 plastic classification. Compared to all other engineering plastics, however, it has a unique advantage in terms of flammability. This makes it a very good alternative to more expensive high-performance plastics which are also V-0 plastics.
Furthermore, the plastic is interesting because the additive used is halogen-free and thus meets many of the needs for different industries. As a result, this plastic is often found in applications where there are flammability requirements, such as in aircraft interiors, or railway components. In addition, since the material is coloured black, it can also be used for outside applications.
We also offer a flammability certificate for this fire resistant plastic, in which the provisions of EN 455454 regarding use in rail transport are met.

Compliances

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
black
Density
1.19 g/cm3

Main Features

  • tested according to EN 45545
  • resistant to many oils, greases and fuels
  • good slide and wear properties
  • high strength
  • good machinability

Target industries

Technical details

products_technical_additionalnote_

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)
    4200 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 78 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 78 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 4 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 4 % 50mm/min DIN EN ISO 527-2
    Flexural strength 124 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3800 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 3000 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 27/54/95 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) 62 kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Shore hardness 82 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 45 C DIN EN ISO 11357
    Melting temperature 221 C DIN EN ISO 11357
    Heat distortion temperature C HDT, Method A ISO-R 75 Method A
    Service temperature 160 C short term NN
    Service temperature 100 C long term NN
    Thermal expansion (CLTE) 7 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases (+) - -
    Flammability (UL94) V0 corresponding to DIN IEC 60695-11-10;
    Flammability + 60 sec. Vertical Bunsen Burner test, 25.853 (a) and Appendix F, Part I, para. (a)(1)(i) FAR 25.853
    Flammability R22 HL1 HL2, R23 HL3 EN 45545-2:2016
    Resistance to weathering - - -
    Water absorption % 24h / 96h (23°C) DIN EN ISO 62
    Water absorption % saturation (23°C) DIN EN ISO 62

Stock program