>

TECASINT 6032 black

Graphite modified polyimide for Direct Forming

add to list
product enquiry
Request direct formed part

TECASINT 6032 black is a highly filled graphite type from Ensinger's 6000 series. Like all materials in this series, TECASINT 6032 black is based on a non-meltable polyimide plastic and is processed exclusively in the direct forming process. In the glass industry, the polyimide TECASINT 6032 black can increase service life and productivity and reduce scrap. Especially in hot glass handling, the extremely high temperature resistance in combination with the low thermal conductivity and the high wear resistance offer great advantages. Typical applications are found in the production of glass bottles for the beverage industry, high-quality cosmetic packaging for perfumes and in the production of pharmaceutical packaging for medicines and vaccines.
High fracture strength, good toughness and low oil absorption are further advantages in addition to the very good machinability without dust formation, especially in comparison to components made of graphite. For tribological applications in mechanical engineering, the automotive industry and aerospace, this PI polymer is used for components with tight tolerances where a low coefficient of thermal expansion is important.

Facts

Chemical designation
PI (Polyimide)
Colour
black
Density
1.57 g/cm3

Main Features

  • very good thermal stability
  • very good bearing and wear properties
  • good wear resistance
  • low thermal expansion
  • high creep resistance
  • high dimensional stability
  • sensitive to hydrolysis in higher thermal range

Target industries

hot glass technology
mechanical engineering
aircraft and aerospace technology
automotive industry

Downloads

Datasheet (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Shore hardness 83 Shore D DIN EN ISO 868
    Impact strength (Charpy) 75.8 kJ/m2 max 7.5 J DIN EN ISO 179-1
    Notched impact strength (Charpy) 5 kJ/m2 max 7.5 J DIN EN ISO 179-1eA
    Tensile strength 51 MPa 50 mm/min DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)    		 5200 MPa 1 mm/min DIN EN ISO 527-1
    Flexural strength 70 MPa 10 mm/min DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 5500 MPa 2 mm/min DIN EN ISO 178
    Compressive strain at break 12 % 10 mm/min EN ISO 604
    Elongation at break (tensile test) 1.3 % 50 mm/min DIN EN ISO 527-1
    Compression strength 125 MPa 10 mm/min EN ISO 604
    Elongation at break (flexural test) 1.3 % 10 mm/min DIN EN ISO 178
    Compression strength 120 MPa 10mm/min, 10% strain EN ISO 604
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Thermal conductivity 1.66 W/(k*m) 40°C DIN EN 821
    Specific heat 0.97 J/(g*K) -
    Heat distortion temperature 278 C 1.85 MPa DIN 53 461
    Glass transition temperature 288 C -
    Thermal expansion (CLTE) 1.5 - - 10-5*1/K 50-200°C DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 2.7 - - 10-5*1/K 200-300°C DIN EN ISO 11359-1;2
    Service temperature C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Other properties Value Unit Parameter Norm
    Flammability (UL94) V0 - corresponding to DIN IEC 60695-11-10;
    HZ-Catalogue yes - -
    HZ Technical guidelines yes lbs/in^2 -
    Water absorption 0,3 % 24 h in water, 23°C DIN EN ISO 62
    Water absorption 3.8 % 24 h in water, 80°C DIN EN ISO 62